Using the Operation Panel
ADVANCED OPERATION GUIDE 2-83
3
Press Z.
4
Press U or V repeatedly until >Type
Adjust > appears.
5
Press [OK]. A blinking question mark (?)
appears.
6
Press U or V to display the desired paper type or a definable setting from
among Custom 1 through Custom 8 to be registered.
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
High quality
Custom 1 (to 8)
NOTE: If you select the paper that is normally used, the paper’s settings
will be changed.
7
When the paper type to be customized is displayed, press [OK].
8
Press Z and proceed to Setting the Paper Weight on the following page.
Setting the Paper Weight
You can set the paper thickness for your custom paper type to be
customized.
1
Display the custom paper type (refer to Creating Custom Paper Type on
page 2-82) and press Z.
2
Press U or V repeatedly until >>Paper
Weight appears.
>Type Adjust >
Plain
>Type Adjust
? Plain
>>Paper Weight
Normal 1
To Next Page
Loading...
