Glossary-2 ADVANCED OPERATION GUIDE
KIR (Kyocera Image
Refinement)
This is Kyocera Mita’s original smoothing function. It uses software to
enhance the printer’s resolution and produce high-quality printing. The
default setting is On.
KPDL KPDL is Kyocera’s implementation of the PostScript page description
language Level3.
MP tray This is an abbreviation for Multi-Purpose tray. The MP tray is used instead
of the cassette when printing on envelopes, postcards, transparency
sheets, and labels.
NetBEUI (NetBIOS Extended
User Interface)
An enhanced version of the NetBIOS protocol, it enables the utilization of
more advanced functions on small-scale networks than do other protocols
such as TCP/IP, etc.
Parallel Interface With this interface, data transfer between the printer and the computer
takes place on 8-bit chunks. The printer can perform IEEE1284 compatible
bi-directional communications.
PostScript This is a page description language developed by Adobe Systems, Inc. It
enables flexible font functions and highly-functional graphics, allowing
higher quality printing.
Printer driver The printer driver makes it possible for you to print data created using
application software. The printer driver for the printer is on the Kyocera
Mita Software Library CD-ROM supplied with the printer. Install the printer
driver on the computer connected to the printer.
Sleep mode This mode is activated after a specified amount of time elapses. The printer
goes into economy mode and a minimum amount of power is consumed.
You can change the amount of time before the printer goes into sleep
mode from the printer’s operation panel. The default setting is 15 minutes.
Status page This lists printer conditions, such as the printer’s memory, the total number
of copies printed, and paper source settings.
Subnet Mask This is a 32-bit numerical value that defines which bits of the IP address
specify the network address and which specify the host address.
TCP/IP (Transmission Control
Protocol/Internet Protocol)
TCP/IP is a suite of protocols designed to define the way computers and
other devices communicate with each other over a network.
USB (Universal Serial Bus) An interface standard for low to middle speed serial interfaces. This printer
supports Hi-Speed USB. The maximum transfer rate is 480 Mbps and the
maximum cable length is 5 meters (16 feet).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
