Kyocera FS FS-1300D User Manual

2-12 Loading Paper
3 Adjust the position of the width guides located on the left and right
sides of the cassette. Press the release button on the left guide and
slide the guides to the paper size required.
4 Adjust the paper length guide to the paper size required.
If you are going to use paper that is longer than A4, pull out the
extension paper cassette by pushing the release lever one by one
and adjust it to the desired paper size.
5 Load the paper in the cassette. Ensure the side to be printed is
facing down and the paper is not folded, curled, or damaged.
Note Paper sizes are marked on the cassette.

Kyocera FS FS-1300D Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Warm-up Time	15 seconds
Time to First Page	6 seconds
Output Capacity	250 sheets
Processor Frequency	360 MHz
First Print Out Time	6 seconds
Dimensions	375 x 393 x 250 mm
Weight	10.5 kg
Print Speed	28 ppm
Paper Capacity	250 sheets
Memory	32 MB
Supported Operating Systems	Windows, Mac, Linux