Kyocera FS FS-1300D User Manual

Connecting and Printing 3-5
Custom Mode
When selecting Custom Mode, printer port and utilities are changed
as necessary.
1 On Installation Method screen, click Custom Mode.
2 On Driver tab and Utility tab of the Custom Installation screen, select
the printer driver and utilities you want to install, and click Next.
3 On Printer Port screen, select the printer port connected to the
printer, click Next.
4 Confirm the settings and click Install. Printer driver installation
starts.
5 Installation Completed screen appears. Click Finish to return to the
main menu.
Note Click Add Port to add new port as necessary.
Note If the Windows Security screen appears, click Install
this driver software anyway to proceed installation. If the
Hardware Installation screen appears in Windows XP, click
Continue Anyway.

Kyocera FS FS-1300D Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Warm-up Time	15 seconds
Time to First Page	6 seconds
Output Capacity	250 sheets
Processor Frequency	360 MHz
First Print Out Time	6 seconds
Dimensions	375 x 393 x 250 mm
Weight	10.5 kg
Print Speed	28 ppm
Paper Capacity	250 sheets
Memory	32 MB
Supported Operating Systems	Windows, Mac, Linux