Kyocera KM-1635

Maintenance
8-2 OPERATION GUIDE
Cleaning the Copier
CAUTION: Remove the power plug from the outlet during cleaning
operations as a safety precaution.
Cleaning the Original Cover
Open the Original Cover and use
a cloth dampened with alcohol or
a dilute neutral detergent to clean
the underside of the Original
Cover.
IMPORTANT: Do not use thinner, organic solvents etc.
Cleaning the Platen
Open the Original Cover and use
a cloth dampened with alcohol or
a dilute neutral detergent to clean
the Platen.
IMPORTANT: Do not use thinner, organic solvents etc.
Cleaning the Slit Glass
When black streaks appear on
copies when using the optional
Document Processor, this means
that the Slit Glass (a) is dirty. Use
a soft dry cloth to clean the slit
glass.
IMPORTANT: Do not use water, thinner, organic solvents, alcohol, etc.
* Refer to Replacing the Toner Container and Waste Toner Box on page
8-5 for instructions for cleaning the inside of the copier.
(a)