Copying Functions
OPERATION GUIDE 4-9
Setting the Margin
Use the procedure given below to change the Margin.
1
Press [Margin] for 3 seconds. The System
Menu for the Margin will be displayed.
2
Press U or V and select the binding margin width.
[Inch specifications]
0.13/0.25/0.38/0.50/0.63/0.75("): the range in which the margin can
be set.
[Metric specifications]
A margin from 1 to 18 (mm) can be set.
3
Press [OK]. The display will blink and the copier will return to the state
where copying can be continued.
43.Stitch Width
1mm
To Next Page
Loading...
