Kyocera KM-2030

4-37
Section 4 Other Features of this Fax
2 Use the keypad to enter the new Permit Telephone Number to
be registered.
* Each Permit Telephone Number can be up to 20 digits in
length and can include any combination of the numerals 0 - 9.
3 Press the Enter key.
> Deleting the Permit Telephone Number
Press the Stop/Clear key. The selected Permit Telephone Number
will be deleted.
4. If you are finished modifying and/or deleting Permit Telephone
Numbers, press the Reset key. The operation panel will return to
the initial mode settings.
* If you want to continue modifying and/or deleting other Permit
Telephone Numbers, return to step 2.
(3) Registering Permit IDs
* You can register up to 5 numbers as Permit IDs in this fax.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise the cover plate and press the Register key.
The “Program” menu will appear in the message display.
2. Use the cursor up or the cursor down key to select “Program Fax
Parameter”.
3. Press the Enter key.
4.
Use the cursor up or the cursor down key to select “Permit ID No.”
[“Permit number”] .
5. Press the Enter key.
6. Use the cursor up or the cursor down key to select an
unregistered number from among #1 - #5.
7. Press the Enter key.
Program:
End
➪
Program Abbreviated Dial
Program 1-Touch Key
Program Fax Parameter:
End
➪
v :
Own Name
Program Fax Parameter:
Own ID :
Permit Tel No.
PP
➪
Permit ID No.
PP
Permit ID No.:
#1:1010
#2:
➪
#3:
#3:0000
Program Permit ID No.
Permit ID No.:
End
➪
#1:1010
#2:
Program:
Program encryption box
Program Encryption ID
➪
Program Fax Parameter
PP
JUL-08-2001 12:00
Set Document
#3:3333
20 Digits
Program Permit Tel. No.
Permit Tel No.:
#1:1111
#2:
➪
#3:
#3:3333
20 digits
Program permit tel. number
Permit tel nr:
#1:1111
#2:
➪
#3:
08-JUL-2001 12:00
Set original
Program:
End
➪
Program abbreviated dial
Program one-touch key
Program:
Encryp. code box regist.
Program encryption code
➪
Program fax parameter
PP
Program fax parameter:
Own ID :
Permit tel nr
PP
➪
Permit number
PP
Permit number:
End
➪
#1:1010
#2:
Permit number:
#1:1010
#2:
➪
#3:
#3:0000
Program permit number
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch) (Metric)