3. Use the cursor up or the cursor down key to select “Print”.
Then press the Enter key.
* If there are no communications that are using the timer currently
in memory, an error message will appear and then the message
display will return to the “Edit” menu.
4. Use the cursor up or the cursor down key to select the document
number that corresponds to the desired communication.
5. Press the Enter key. A sample image of the corresponding
documents will be printed out.
2-13
Section 2 Various Functions of this Fax
(1) Print Out a Sample Image of Waiting
Documents
If you want to check the documents that correspond to a specific
transmission that is in memory and waiting for transmission, you can
print out a sample page of those documents.
* Even if you print out a sample image of the documents, the
transmission will be carried out on schedule.
*
If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise the cover plate and press the Information key.
The “Communication information” menu will appear in the
message display.
2. Use the cursor up or the cursor down key to select “Edit”.
Then press the Enter key.
Editing a Communication in Memory
You can perform various actions relating to a scheduled communication that uses the
timer. For example, you can modify certain information relating to the communication or
even cancel the communication completely. You can also print out a sample image of
the corresponding documents as well as initiate (force-start) the communication without
waiting for the actually scheduled start time.
JUL-08-2001 12:00
Set Document
Communication information:
➪
Tx result on LCD
Rx result on LCD
Edit
PP
Edit:
➪
Print
Immediate TX
Program/Change
Print: List
➪
Doc # :005
v :YDK P03
13:00 Broadcast
Print: List
➪
Doc # :014
v :RRD P02
14:30 Send
08-JUL-2001 12:00
Set original
(Inch)
(Metric)
(Inch) (Metric)
Communication information:
➪
TX result display
RX result display
Edit
PP
(Inch)
(Metric)
Edit:
➪
Print
Immediate transmission
Program/Change
(Inch)
(Metric)
Print: list
➪
Doc. nr :005
v :YDK P03
13:00 Broadcast
(Inch)
(Metric)
Print: list
➪
Doc. nr :014
v :RRD P02
14:30 Send
(Inch)
(Metric)
To Next Page
Loading...
