Kyocera KM-2030

6-13
Turning 2 in 1 Reception ON/OFF
If 2 in 1 reception is turned ON and two 51/2" x 81/2" [A5] size pages are
received in a row during the same reception, those 2 pages will be
printed onto a single sheet of 11" x 81/2" [A4] size paper. In order to
accomplish 2 in 1 Reception, it is necessary to turn this function ON in
advance.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Raise the cover plate and press the Configure key.
2. Use the cursor up or the cursor down key to select “2 in 1 RX”
[“2-up RX”].
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select whether to turn
2 in 1 reception ON or OFF.
* The asterisk (
*
) in the message display indicates the current
setting.
5. Press the Enter key. The setting for 2 in 1 Reception is complete.
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
Section 6 Various Settings and Registration in this Fax
2 in 1 RX:
➪
On
*Off
Set Fax:
RX Date/Time :Off
PaperFeed Sel.:AutoSelect
➪
2 in 1 RX :Off
Set Fax:
RX Date/Time :Off
PaperFeed Sel.:AutoSelect
➪
2 in 1 RX :On
JUL-08-2001 12:00
Set Document
Set Fax:
End
➪
Line Type :Tone Dial
TTI :Outside P.
08-JUL-2001 12:00
Set original
Set fax:
2-up RX :Off
Management :Off
➪
Remote diagn. :Off
Remote diagn.:
➪
On
*Off
Set fax:
2-up RX :Off
Management :Off
➪
Remote diagn. :On
(Inch)
(Metric)
(Inch) (Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)
Set fax:
End
➪
TTI :Outside p.
Print report
PP