Kyocera KM-2030

6-18
7. Press the Enter key.
* If an error message appears in the message display, the entered
password does not match the registered one. Enter the correct
password.
8. Use the keypad to enter the new management password (4 digits).
* The management password is a 4-digit number that can include
any combination of the numerals 0 - 9.
9. Press the Enter key.
Registration of the new management password is complete.
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
Section 6 Various Settings and Registration in this Fax
Password(New):
4 Digits
Enter New Password
Mgmt ID (new):
4 digits
Enter new password
Program Fax Parameter:
Date & Time :12:00
Access Code
PP
➪
Management Password
PP
Password(New):2864
4 Digits
Enter New Password
Mgmt ID (new):2864
4 digits
Enter new password
Program fax parameter:
Date and time :12:00
Access code
PP
➪
Management password
PP
(Inch)
(Metric)
(Inch)
(Metric)
(Inch)
(Metric)