Kyocera KM-2560

Status / Job Cancel
ADVANCED OPERATION GUIDE 5-19
5
2
Press [Device/
Communication] >
[Remove] in
Removable
Memory.
3
When Device can be removed safely is displayed, remove the USB
memory.
Canceling FAX Communication
Cancel fax communication.
Use the procedure below to select the interface.
1
Press the Status/Job Cancel key.
2
Press [Device/
Communication] >
[Line Off] in FAX
Port 1 or FAX Port 2.
3
Press [Yes] in the confirmation screen. The line is disconnected, and the
fax communication is canceled.
Printing Partition List
Print the partition list of the memory for printer (Memory Card).
Use the procedure below to print the partition list.
1
Press the Status/Job Cancel key.
Detail
Scanner
Printer
Removable Memory
Hard Disk
FAX Backup Memory
Memory Card
Ready.
Ready.
Safely removable.
Error has occurred.
Not connected.
Format Remove
Display
Error
Format Printing list
Printing Jobs Sending Jobs Storing Jobs
Device/
Communication
Paper /Supplies
Log Executing TX job **. 10/10/2007 10:10
Status
Status
Ready.
Device/
Communication
Paper /Supplies
10/10/2007 10:00
Scanner
Ready.
Printer
Not connected.
Removable Memory
Hard Disk
Not connected.
Memory Card
Storing JobsSending JobsPrinting Jobs
Format Remove
Line Off Manual RX
FAX Line 1
Log
Format Printing list
FAX
Ready.
Check New FAXFAX/i-FAX
FAX Line 2
Ready.
Line Off