Copying Functions
1-6 ADVANCED OPERATION GUIDE
NOTE: You can conveniently select in advance the size and type of
paper that will be used often and set them as default (refer to Paper Size
and Media Type Setup for Multi Purpose Tray on page 6-9).
Use the procedure below to select the paper size and media type.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Org./Paper/Finishing], [Paper Selection] and then [MP Tray
Setting].
4
Press [Standard
Sizes 1 ], [Standard
Sizes 2 ], [Others] or
[Size Entry] to select
the paper size.
If you select [Size
Entry], press [+] or
[–] to specify X
(horizontal) and Y
(vertical) sizes. You
can enter the size
directly using the
numeric keys after
pressing [# Keys].
5
Press [Media Type].
6
Press [Media Type] to select paper type, and press [OK].
7
Press [OK].
8
Press [OK].
** The input units can be changed in the System menu.
Refer to Switching Unit of Measurement on page 6-17.
*** For instructions on how to specify the custom paper types 1 to 8,
refer to Paper Weight on page 6-10.
Status 10/10/2007 10:10
Ready to copy.
Copies
OK
Paper Selection - MP Tray Setting
Others
Size Entry
Plain
Media Type
Ledger
Legal
8.5x13.5"
Letter
Statement
OficioII
Letter
Executive
1
Standard
Sizes 1
Standard
Sizes 2
Status 10/10/2007 10:10
Ready to copy.
Copies
OK
Paper Selection
Others
Size Entry
Plain
Media Type
X
(5.83 - 17.00)
Y
"
# Keys
(3.86 - 11.69)
"
# Keys
1
11.00
8.50
Standard
Sizes 1
Standard
Sizes 2
To Next Page
Loading...
