Kyocera KM-3060

System Menu
6-40 ADVANCED OPERATION GUIDE
Auto Paper Selection
If [Auto] is selected for Paper Selection, set the paper size selection
method when the zoom changes. The table below shows the available
settings.
Use the procedure below to specify the action performed for Auto Paper
Selection.
1
Press the System Menu key.
2
Press [Copy] and [Change] of Auto Paper Selection.
3
Press [Most Suitable
Size] or [Same as
Original Size].
4
Press [OK].
Auto % Priority
When a paper source of different size from the original is selected, select
whether automatic zoom (reduce/zoom) is performed. The table below
shows the available settings.
Use the procedure below to specify the automatic zoom priority.
1
Press the System Menu key.
Item Description
Most Suitable Size Select paper based on the current zoom
and the size of the original.
Same as Original Size Select paper that matches the size of the
original, regardless the zoom.
Copy - A uto Paper Sel ect ion
Cancel OK
Status 10/10/2007 10:10
Set the automatic paper selection method.
[Mos t Suitable Si ze]: Selects paper bas ed on
the current zoom and the size of the original.
[Same as Original Siz e]: Selects paper
that matches the size of the original.
Same as
Original Size
Most Suitable
Size
Item Description
Off No zoom performed (copied in original
size).
On Automatic zoom performed as appropriate.