Kyocera KM-3060 - Page 25

Copying Functions
ADVANCED OPERATION GUIDE 1-11
1
Use the procedure below to select the orientation when placing the
originals on the platen.
1
Place the originals on the platen.
2
Press the Copy key.
3
Press [Org./Paper/Finishing] and then [Original Orientation].
4
Select [Top Edge
Top] or [Top Edge
Left] as the way the
original is oriented.
5
Press [OK].
6
Press the Start key to start copying.
Status
10/10/2007 10:10
Ready to copy.
Copies
Cancel OK
Original Orientation
Press [OK] to display
Add Shortc ut
Top Edge Left
Enter the orientation of the
original document 's top edge.
Top Edge T op
1
the image.