Basic Operation
3-35
Low-Power Mode
To activate Low-Power mode, press the Energy Saver
key.
On the operation panel, only the Energy Saver,
Power, and main power indicators will remain lit.
The machine automatically wakes and begins printing
if print data is received during Low-Power mode. If the
optional fax is installed, the machine also wakes up
and begins printing when a fax is received.
To resume copying, perform one of the following
actions. The machine returns to a copy-ready
condition.
• Press any key on the operation panel.
• Open the original platen or the optional document processor.
• Place originals in the optional document processor.
The machine will resume copy functionality in 30 seconds.
Auto Low-Power Mode
In Auto Low-Power mode, the machine automatically switches to Low-Power mode if left idle for a
preset period. The default period for Auto Low-Power mode is 7 minutes.
To Next Page
Loading...
