Basic Operation
3-2
Basic Copying Procedures
Follow the steps as below for basic copying.
1
Open the main power switch cover and move the main
power switch to on ( | position).
After warm-up is complete, the Start key’s Start
indicator will glow green.
2
Press the Copier key.
3
Place the original.
NOTE: Refer to Placing Originals on page 2-16 for
original placement instructions.
4
Press the Auto Color, Full Color or Black&White key
to select a color mode.
Color Mode Description
Auto color mode Automatically detects color and black and white originals and copies
color originals in color and black and white originals in black and white.
Full Color mode Copies all originals in full color.
Black and White mode Copies all originals in black and white.
To Next Page
Loading...
