2GN/2GP/2GR-8
1-1-2
Continuous copying ........................1 to 999 sheets
Light source ....................................Inert gas lamp
Scanning system ............................Flat bed scanning by CCD image sensor
Photoconductor...............................a-Si (drum diameter 40 mm)
Image write system.........................Semiconductor laser
Charging system.............................Single positive corona charging
Developing system .........................Dry, reverse developing (single component system)
Developer: 1-component, magnetism toner
Toner replenishing: automatic from a toner container
Transfer system ..............................Transfer roller
Separation system ..........................Separation electrode
Cleaning system .............................Cleaning blade and roller
Charge erasing system...................Exposure by cleaning lamp
Fusing system.................................Heat roller
Heat source: halogen heaters
Abnormally high temperature protection devices: thermostats
Memory...........................................Standard 512 MB/Maximum 1024 MB
Hard disk.........................................80 GB
Resolution.......................................Scanning: 600 x 600 dpi
Printing : 600 x 600 dpi (photo mode: 1800 dpi equivalent x 600 dpi)
Operating environment ...................Temperature: 10 to 32.5
°C/50 to 90.5°F
Humidity: 15 to 80% RH
Altitude: 2500 m/8,202 ft maximum
Brightness: 1500 lux maximum
Dimensions .....................................599 (W) x 646 (D) x 745 (H) mm
23
9/16" (W) x 25 7/16" (D) x 29 5/16" (H)
Weight.............................................Approx. 85 kg/187 lbs
Space required................................753 (W) x 646 (D) mm
29
5/8" (W) x 25 7/16" (D)
Functions ........................................Original size, Paper selection, Mixed sized originals, Original orientation, Collate/Off-
set mode, Staple/Punch mode, Output destination, Zoom mode, Combine mode, Mar-
gin/Centering mode, Border erase, Booklet from sheets, Duplex, Cover mode, Form
overlay, Page numbering, Memo mode, Density adjustment, Selection of image qual-
ity, EcoPrint mode, Batch scanning, Auto image rotation, Inverted copying, Mirror
image, Job finish notice, File name, Priority override, Multi-page forms, Repeat copy,
Programmed copying, Registering shortcuts
Power source..................................120 V AC, 60 Hz, 11.5 A
220 to 240 V AC, 50 Hz, 6.3 A
Options ...........................................Document processor, paper feeder, 3000-sheet paper feeder, document finisher,
3000-sheet document finisher, centerfold unit, mailbox, punch unit, built-in finisher,
job separator, key counter, fax kit, security kit, fax backup kit, serial interface,
upgrade kit and expanded memory
To Next Page
Loading...
