To Next Page
C
criosAug 18, 2025
Why does my Kyocera Copier say 'Add paper in drawer x'?
- CCaroline RobertsAug 18, 2025
This message appears because the indicated drawer or cassette is empty. To resolve this, load paper of the indicated size into the drawer.
Why does my Kyocera Copier say 'Add paper in drawer x'?
This message appears because the indicated drawer or cassette is empty. To resolve this, load paper of the indicated size into the drawer.
What to do if my Kyocera Copier says 'Check paper size. Copy paper is not the same size as original'?
If you see this error on your Kyocera Copier, it means that the size of the paper set on the multi-bypass tray differs from the size selected in the paper size setting. To fix it, press the Stop/Clear key to dismiss the error, ensure that the paper size on the multi-bypass tray matches the paper size selected in the settings, and then restart the copy operation.
What to do if my Kyocera Copier says 'Reposition original or change drawer'?
This message on your Kyocera Copier indicates that the orientation of the original document and the selected paper are different. To solve this, change the orientation of the original document.
Why does my Kyocera Copier say 'Close xxx cover'?
This message indicates that the specified cover on your Kyocera Copier is open. Make sure to close all covers securely to continue.
What to do if my Kyocera Copier says 'Paper drawer is out of order. Select another paper drawer'?
This message on your Kyocera Copier means that the drawer currently in use is malfunctioning and cannot be used. If you want to continue copying, use another drawer.
How to fix 'Set drawer' error on Kyocera Copier?
If your Kyocera Copier displays a 'Set drawer' error, it means that one of the drawers is not closed properly. To resolve this, pull the drawer out completely and then push it back in firmly until it is fully closed.
Why does my Kyocera Copier say 'Check paper size'?
This message appears because there is no paper loaded in your Kyocera Copier that matches the size required for the currently selected mode. To proceed, check the paper and ensure it is the correct size for the job.
What to do if my Kyocera Copier says 'Install duplex unit'?
This message on your Kyocera Copier indicates that the duplex unit is not properly installed. To fix this, first pull the duplex unit out and then push it all the way back in until it is securely in place.
What does 'Please open left tray. Unable to copy' mean on my Kyocera Copier?
This message appears on your Kyocera Copier because the 'Left tray' is selected under the copy default setting 'Copy eject location', or the 'Transparency' or 'Rough' setting is selected under the paper size and type setting, but the left tray is closed. To resolve this, open the left tray.
How to solve 'Cannot duplex with bypass' error on Kyocera Copier?
This error on your Kyocera Copier indicates that duplex copying is not possible when feeding paper from the multi-bypass tray. To resolve this, switch to paper feed from one of the drawers or cancel duplex copying.
General| Brand | Kyocera |
|---|---|
| Model | KM-C850 |
| Category | All in One Printer |
| Language | English |
