Page 5-27
5-3 Registering Dialing Information
5. Select the entry or entries in the list at right and then their destination (open number(s)) in the list at left, and click on the
<< button. The information selected in the list at right will be moved to the selected location(s) in the list at left.
6. Repeat steps 4 and 5 until all entries are arranged in the desired order.
NOTE
When you are finished, make sure that all of the entries are back in the list at left. This procedure can not be completed if
there are any dialing entries remaining in the list at right.
7. Make sure that the order of entries is correct and then click on the OK button.
8. Transmit the edited data to the fax machine. Refer to steps 9 and 10 under “5-1 Registering Self-Station Information” on
page 5-2 to transmit the edited data to the fax machine.
To Next Page
Loading...
