Page 5-31
5-4 Registering Box Information
7. To register an Encryption key, go to the next step.
To continue without registering an Encryption key, go directly to step 13.
8. Click on the ... button for the Encryption Code field. The Encryption Key Selection dialogue box will appear.
9. Select the Encryption key ID number that you want to register and then click on the Edit button. The Encryption Key
Registration dialogue box will appear.
10. Use numerals (0 to 9) and/or the English alphabet (A to F) to enter the desired 16-digit Encryption key.
11. Click on the OK button. The registered information will appear in the Encryption Key Selection dialogue box.
12. Click on the OK button. The Encryption Box dialogue box will appear once again.
13. Make sure that the registered information is correct and then click on the OK button.
14. Transmit the edited data to the fax machine. Refer to steps 9 and 10 under “5-1 Registering Self-Station Information” on
page 5-2 to transmit the edited data to the fax machine.
To Next Page
Loading...
