Kyocera TASKalfa 220 - Page 97

Appendix
Appendix-8
30.CustmMedType1 Sets the paper weights and 2-sided copying to the
Custom paper. 2-sided copying will be displayed only
when the optional Duplex Unit is installed.
Paper weights
Extra Heavy
Heavy 3
Heavy 2
Heavy 1
Normal 3
Normal 2*
Normal 1
Light (Vellum)
2-sided copying
On: Enabled*
Off: Disabled
31.CustmMedType2
32.CustmMedType3
33.CustmMedType4
34.CustmMedType5
35.CustmMedType6
36.CustmMedType7
37.CustmMedType8
38.Hagaki/A6RDet Select the paper size when copying an original
document of non-standard size.
Hagaki
A6 R*
39.B4R/Folio Det Select the paper size when copying an original
document of non-standard size.
B4 R
Folio R*
40.11x15" Detect When the size of the original document is 11 x 15", the
original document is automatically zoomed.
On
Off*
41.Copy Limit Limits the number of copies or sets of copies that can
be made at one time.
1 to 999 (*999)
42.Duplex 2nd Rotates the paper 180 degrees and copies it when
both sides of a sheet are to be copied.
This will not be displayed when the optional Duplex
Unit is not installed.
Rotation On
Rotation Off*
43.Stitch Width Sets the initial value for the Binding Margin. [Inch specifications]
0.13/0.25/0.38/0.50/0
.63/0.75 (") (*0.25)
[Metric
specifications]
1 to 18 (mm) (*6)
44.Border Erase Sets the initial value for the border width that will be
lightened to remove shadows from a sheet or book.
[Inch specifications]
0.13/0.25/0.38/0.50/0
.63/0.75 (") (*0.25)
[Metric
specifications]
1 to 18 (mm) (*6)
45.4 in 1 Layout Sets the layout for the order in which the originals will
appear in the 4-in-1 Layout mode.
Portrait 1*
Portrait 2
Landscape 1
Landscape 2
46.Combine Border Selects the type of borderline to be used in the Layout
mode.
Off*
Solid
Dotted
47.Rotate/Offset Sets the copier so that each copy set is rotated and
collated when it is collate copied.
On: Rotational
Collating Enabled
Off: Rotational
Collating Disabled*
48.Auto Rotation Sets of copied documents are output
landscape/portrait alternately, allowing easy
separation of each set from the other.
On: Enabled*
Off: Disabled
System Menu Items Description Available settings