9-13
Troubleshooting > Troubleshooting
M
N
P
R
Message Display Checkpoints Corrective Actions
Reference
Page
Maximum Number of
scanned pages.
Is the acceptable scanning count
exceeded?
Cannot scan pages any more. The job is
canceled. Press the [OK] key.
―
Memory is full. ― Unable to continue the job as the
memory is used up. Change the print
resolution from Fast 1200 to 600 dpi.
Refer to Printer Driver User Guide.
―
Message Display Checkpoints Corrective Actions
Reference
Page
Non-genuine Toner. Is the installed toner container our own
brand?
The manufacturer assumes no
responsibility for damage caused by a
non-genuine toner. We recommend that
you only use genuine toner containers.
When you want to use the toner
container currently installed, press the
[OK] key and the [Stop] key
simultaneously for 3 seconds or more.
―
Message Display Checkpoints Corrective Actions
Reference
Page
PaperJam.(Cassette 1 (to 4)) ― A paper jam has occurred. Refer to
Clearing Paper Jams
on page 9-16 and
remove the jammed paper.
page 9-16
PaperJam (MP tray)
PaperJam. (RightCover1)
↑↓ (Displayed alternately)
Check (A1)(A2) in the Right
Cover 1.
PaperJam (RightCover2 (or
3))
Paper Jam. (DP)
↑↓ (Displayed alternately)
Check (B)(C) in the DP Cover
A paper jam has occurred in the
document processor.
A paper jam has occurred. Refer to
Clearing Paper Jams
on page 9-16 and
remove the jammed paper.
page 9-16
Print overrun.
Job is canceled.
― Warning. Low printer memory. The job
was canceled. Press the [OK] key.
―
Message Display Checkpoints Corrective Actions
Reference
Page
Remove originals in
document processor.
Are there any originals left in the
document processor?
Remove originals from the document
processor.
―
Remove the paper from the
inner tray.
― Remove paper from the inner tray. Press
the [OK] key to resume printing.
―
To Next Page
Loading...
