9-14
Troubleshooting > Troubleshooting
S
T
U
Replace all originals and
press Start key.
― Remove originals from the document
processor, put them back in their original
order, and place them again. Press the
[OK] key to resume printing. Press the
[Stop] key to cancel the job.
―
Replace MK. ― Replacement of the parts in the
maintenance kit is necessary at every
150,000 pages of printing and requires
professional servicing. Contact your
Service Representative.
―
Restricted by Job
Accounting. (Print)
― This job is canceled because it is
restricted by job accounting. Press the
[OK] key.
―
Restricted by Job
Accounting. (Scan)
― This job is canceled because it is
restricted by job accounting. Press the
[OK] key.
―
Message Display Checkpoints Corrective Actions
Reference
Page
Scanner memory is full. ― Scanning cannot be performed any
more due to insufficient memory of
scanner. Press the [OK] key to cancel
the job.
―
Set another cassette. Have you selected Offset? To use offsetting, the same size of paper
as the selected paper source must be
loaded in a different orientation in a
different paper source.
page 5-19
Shake the toner container. ― Open the front cover of the machine and
pull out the toner container. Shake the
toner container well and reinstall it.
page 9-3
Message Display Checkpoints Corrective Actions
Reference
Page
Tone r is l o w.
(Replace when empty.)
― It is almost time to replace the toner
container. Obtain a new toner container.
―
Message Display Checkpoints Corrective Actions
Reference
Page
Unknown toner installed.PC Does the installed toner container's
regional specification match the
machine's?
Install the specified toner container. page 9-3
Message Display Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
