5-17
Operation on the Machine > Copying
Combine
Combines 2 or 4 original sheets into 1 printed page. You can select the page layout and the type of boundary lines
around the pages.
The following types of the boundary lines are available.
Item Value Description
Off ― Disables the function.
2 in 1 ― Copies the original with the default setting. For the
default settings, refer to Function Default
on page 7-
13.
4 in 1
Advanced Combine ― Changes the settings.
2 in 1 Layout L to R/T to B, R to L Select the page layout of scanned originals, and press
the [OK] key.
Border Line None, Solid Line, Dotted Line,
Positioning Mark
Select the page boundary line, and press the [OK] key.
Orig. Orientation Top Edge on Top, Top Edge
on Left
Select the orientation of the original document top
edge to scan correct direction.
Choose orientation of the originals, either [Top Edge
on Top] or [Top Edge on Left]. Then press the [OK]
key.
4 in 1 Layout Right then Down, Down then
Right, Left then Down, Down
then Left
Select the page layout of scanned originals, and press
the [OK] key.
Border Line None, Solid Line, Dotted Line,
Positioning Mark
Select the page boundary line, and press the [OK] key.
Orig. Orientation Top Edge on Top, Top Edge
on Left
Select the orientation of the original document top
edge to scan correct direction.
Choose orientation of the originals, either [Top Edge
on Top] or [Top Edge on Left]. Then press the [OK]
key.
To Next Page
Loading...
