1. Saddle Stitch Finisher (DF-810)
This Finisher enables saddle stitching, in addition to sort/
group nishing and stapling. The Hole Punch Unit
(optional, MJ-6102) can be installed in this Finisher.
2. Finisher (DF-800)
This Finisher enables sort/group nishing and stapling.
The Hole Punch Unit (optional, MJ-6102) can be installed
in this Finisher.
3. Hole Punch Unit (PH-6)
This unit enables you to punch holes on printed sheets.
4. External Large Capacity Feeder (PF-800)
This feeder enables you to feed up to 2500 sheets (80 g/m
2
or 20 lb. Bond) of A4 or LT paper.
Other options available are as follows. Contact your service technician or distributors for details.
FAX Unit (FAX System (T))
This is a unit for using the equipment as a Fax machine.
Installed inside of the equipment
2nd Line for FAX Unit (MP-80)
This unit enables you to add a line to the Fax, making a 2nd line
available.
Installed inside of the equipment
The Fax Unit (optional, FAX System (T)) is required.
Wireless LAN Module (GN-1050)
This module enables the equipment to be used in a wireless LAN
environment.
Installed inside of the equipment
The Antenna (optional, GN-3010) is required.
The equipment cannot be connected to the wireless and wired
LAN at the same time.
•
•
•
•
•
•
Bluetooth Module (GN-2010)
This module enables you to perform Bluetooth printing.
Installed inside of the equipment
The Antenna (optional, GN-3010) is required.
Antenna (GN-3010)
This is used when the Wireless LAN Module or Bluetooth Module
is installed.
Data Security Kit (GP-1070)
This is an enabler to erase the data stored temporarily when
copying, printing, scanning, Fax, Internet Fax or network Fax is
performed. It overwrites temporarily stored data with random
data.
•
•