1. PRINT DATA lamp
This lamp lights during reception of data such as print
data.
2. ALARM lamp
This lamp lights when an error occurs and the equipment
needs some actions to be taken.
3. MAIN POWER lamp
This lamp lights when the main power switch of this
equipment is ON.
4. ON/OFF lamp
This lamp lights when the POWER of this equipment is ON.
5. [POWER] button
Use this button to shut down the power of the equipment.
6. [ENERGY SAVER] button
Use this button for the equipment to enter the energy
saving mode.
7. [MENU] button
Use this button to display frequently used templates.
8. [COPY] button
Use this button to use the copying function.
9. [e-FILING] button
Use this button to access stored image data.
10. [SCAN] button
Use this button to use the scanning function.
11. [PRINT] button
Use this button to use the printing functions such as
private printing, in this equipment.
12. [FAX] button
Use this button to use the Fax / Internet Fax function.
13. MEMORY RX / LINE lamps
These lamps show the status of the Fax data reception and
Fax communication. The equipment can be operated even
while these lamps are lit.
14. [FUNCTION CLEAR] button
When this button is pressed, all selected functions are
cleared and returned to the default settings. If the default
setting is changed on the control panel, and then copying,
scanning, Fax or similar is performed, this button blinks.
15. [STOP] button
Use this button to stop any scanning and copying
operations in progress.
16. [START] button
Use this button to start copying, scanning and Fax
operations.
To Next Page
Loading...
