Kyocera TASKalfa 650c - Page 49

3
2
1
4
5
Adding Staples
47
2
1
1
Open the front cover of the Finisher, and then pull
out the saddle stitch unit.
2
1
2
Take out two empty staple cartridges.
2
3
1
1
3
Take the empty staple case out of the staple
cartridge.
2
1
3
4
Install a new staple case into the staple cartridge
and remove the seal bundling the staples.
2
1
5
Install two new staple cartridges.
2
1
6
Insert the saddle stitch unit into the Finisher, and
then close the front cover of the Finisher.
Saddle stitch unit (Optional: DF-810)
Refer to the Troubleshooting Guide for details.