Kyocera TASKalfa 650c - Page 65

5
2
1
3
4
Specications of Equipment
63
Equipment Specications
Type Console type
Original glass Fixed
Printing (copying) system Indirect electro photographic method
Developing system 2-component magnetic brush developing
Fixing method External heating STF fusing system
Photosensor type OPC
Original scanning system
Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by
feeding the original)
Original scanning sensor Linear CCD sensor
Scanning light source Xenon lamp
Resolution
Scanning
600 dpi x 600 dpi
Writing
Black-and-white: 2400 dpi x 600 dpi
Color, image smoothing: 600 dpi x 600 dpi, 8 bit
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. A3 or LD
Acceptable copy
paper size
Drawer
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, 305 mm x 457 mm, 320 mm x 450 mm, 320 mm x
460 mm, LD, LG, LT, LT-R, ST-R, COMP, 13" LG, 8.5" SQ, 12" x 18", 8K, 16K, 16K-R
Bypass
Paper size within 100 - 330 mm (5 1/2" - 12.99") (Length), 148 - 483 mm (8 1/2"-19.02")
(Width) (For printing functions, within 466 mm - 1200 mm (18.35"-47.24") (width))
Acceptable copy
paper weight
Drawer
64 - 256 g/m
2
(17 - 80 lb. Cover (140 lb. Index))
Bypass 64 - 300 g/m
2
(17 -110 lb. Cover)
Warm-up time Approx. 180 seconds
First copy time
(A4 or LT portrait)
Black-and-white
55/55 ppm model/65/65 ppm model: 5.3 seconds
75/65 ppm model: 4.6 seconds
Color 6.5 seconds
Continuous copy speed Refer to the Copying Guide.
Multiple copying Up to 9999 copies (digital key entry)
Excluded image
width
Black-and-white
Leading edge: 3.0±2.0 mm (0.12"±0.08"), Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
Both edge: 2.0±2.0 mm (0.08"±0.08")
Color
Leading edge: 5.0±2.0 mm (0.20"±0.08"), Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
Both edge: 2.0±2.0 mm (0.08"±0.08")
Printer
(Black- and-
white/Color)
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17” +0.11” -0.05”), Trailing edge: 4.2 mm +1.2
mm -2.8 mm (0.17” +0.05” -0.11”), Both edge: 4.2±2.0 mm (0.08”±0.08”)
Reproduction
ratio
Actual size
100±0.5%
Zoom
25 - 400% (in 1% increments)
For the Reversing Automatic Document Feeder 25 - 200% (in 1% increments)
Paper Supply
Drawer
Approx 540 sheets (80 g/m
2
, 20 lb. Bond)
Bypass Tray
Approx 100 sheets (80 g/m
2
, 20 lb. Bond)
Receiving tray loading capacity
Approx 100 sheets (80 g/m
2
, 20 lb. Bond)
Toner density adjustment Magnetic auto-toner system and Pixel counter control
Exposure control
Automatic plus manual selection from 11 exposure step
USB interface USB2.0 (Hi-Speed)
Environment (for normal use)
Temperature: 10 ° - 30 °C (50 ° - 86 °F), Humidity: 20 - 85% (No Condensation)
Power requirements and Power
consumption
(including optional equipments)
Europe
AC 220 - 240 V±10%, 13 A (50/60Hz), 3.2 kW or less
North America
55/55 ppm model: AC 115 V±10%, 16 A (50/60Hz), 2.0 kW or less
65/65 ppm model: AC 115 V±10%, 18.5 A (50/60Hz), 2.2 kW or less
75/65 ppm model: AC 115 V±10%, 18.5 A (50/60Hz), 2.2 kW or less
Saudi Arabia (100 V)
55/55 ppm model: AC 127 V±10%, 16 A (50/60Hz), 2.1 kW or less
65/65 ppm model: AC 127 V±10%, 18.5 A (50/60Hz), 2.4 kW or less
75/65 ppm model: AC 127 V±10%, 18.5 A (50/60Hz), 2.4 kW or less
Other
AC 220 - 240 V±10%, 10 A (50/60Hz), 2.4 kW or less
* Including Saudi Arabia 200 V
Dimensions (equipment only)
980 mm (38.58") (W) x 698 mm (27.48") (D) x 1540 mm (60.63") (H)