Chapter 5 MAINTENANCE & SPECIFICATIONS
Tray loading capacity of Finisher
Upper Tray
With mixed paper not loaded
Mode Non-Sort
A4, A5-R, B5, LT, ST-R, 8.5"SQ, 16K
36.75 mm
(250)
A3, A4-R, B4, B5-R, FOLIO, 305 mm x 457 mm, LD, LG, LT-R,
COMP, 13"LG, 12"x18", 8K, 16K-R
18.4 mm
(125)
Lower Tray
With mixed paper not loaded
Mode Non-sort Sort/Group Front/Rear Single Position Stapling Two Positions Stapling
A4, B5, LT, 8.5"SQ, 16K
350 mm
(3000)
350 mm
(3000)
Whichever of 100 copies or 2000
sheets is reached rst
Whichever of 150 copies or 2000
sheets is reached rst
A3, A4-R, B4, FOLIO, LD, LG,
LT-R, COMP, 13"LG, 8K
175 mm
(1500)
175 mm
(1500)
Whichever of 50 copies or 1000
sheets is reached rst
Whichever of 75 copies or 1000
sheets is reached rst
When mixed-size paper is loaded, the tray loading capacity should follow the specications for larger paper sizes in the above tables.
Refer to the Copying Guide for the tray loading capacity of the saddle stitch tray.
•
•
Unit: mm (with allowable error of ±7mm or 0.28”)
Values in parentheses: Number of sheets (80g/m
2
or 20 lb. Bond)
Unit: mm (with allowable error of ±7mm or 0.28”)
Values in parentheses: Number of sheets (80g/m
2
or 20 lb. Bond)
Hole Punch Unit
Model name PH-6 Series
Acceptable paper size A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP, 8.5"SQ, 13"LG, 8K, 16K, 16K-R
Acceptable paper weight 64 - 256 g/m
2
, 17 lb. Bond - 140 lb. Index (Transparencies or specially-treated paper are not available)
Dimensions 112 mm (4.41") (W) x 573 mm (22.56") (D) x 323 mm (12.72") (H) (excl. Lower cover)
Weight Approx. 7 kg (15.4 lb.)
Numbers of punching holes and hole diameter Available paper size
Japan and most of Europe
(MJ-6102E)
2 holes
(6.5 mm or 0.26” dia.)
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R,
COMP, 8.5”SQ, 13”LG, 8K, 16K, 16K-R
North America
(MJ-6102N)
2/3 holes switchable
(8.0 mm or 0.32” dia.)
2 holes: A4, B4, B5, B5-R, FOLIO, LT, LG, 13”LG, COMP,
8.5”SQ, 16K
3 holes: A3, A4, LD, LT, 8K, 16K
France
(MJ-6102F)
4 holes
(6.5 mm or 0.26” dia.; 80 mm or 3.15” pitch)
A3, A4-R, LT-R, LD, 8K, 16K
Sweden
(MJ-6102S)
4 holes
(6.5 mm or 0.26” dia.; 70 mm and 21 mm or 2.76
and 0.83” pitch)
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R,
COMP, 8.5”SQ, 13”LG, 8K, 16K, 16K-R
FAX Unit
Model Name FAX System (T)
Size of Original A3, A4, A4-R, A5, A5-R, B4, B5, B5-R, FOLIO, LD, LT-R, LG, ST, ST-R, COMP
Recording Paper Size
297 mm - 420 mm (A3), 210 mm - 297 mm (A4), 148 mm - 210 mm (A5), 257 mm - 364 mm (B4), 182 mm -257
mm (B5)
Compatibility
Communication Modes
Exclusive Mode, ECM, G3
Communication
Resolution
Horizontal: 8 dots/mm, 16 dots/mm, 300 dots/inch
Vertical: 3.85 lines/mm, 7.7 lines/mm, 15.4 lines/mm, 300 dots/inch
Transmission Rate 33,600/31,200/28,800/26,400/24,000/21,600/19,200/16,800/14,400/12,000/9,600/7,200/4,800/2,400 bps
Encoding Systems JBIG/MMR/MR/MH
Printing Method Laser electronic printing
Memory Capacity Transmission/Mailbox: 3.5 GB (HDD) Reception: 500 MB (HDD)
*1
Unit Type Desktop type, transmitting/receiving dual type
Applicable Network Public Switched Telephone Network (PSTN)
*1 For hard drives, MB means 1 million bytes. (Total HDD accessible capacity may vary depending on operating environment.)
Refer to the MP-80/FAX System (T) Operator's Manual for FAX Unit for details of the Fax Unit (FAX System (T)).
Recommended paper is used for the values above. Specications and appearance are subject to change without notice
in the interest of product improvement.
66
To Next Page
Loading...
