Preparations
2-7
Loading postcards or envelopes in the MP tray
1
When loading a postcard or envelope, open the paper
stopper shown in the figure.
For landscape envelopes, close the flap. Insert the
envelope all the way along the width guides, keeping
the printing side face-down and the edge with the flap
facing towards you.
For portrait envelopes, close the flap. Insert the
envelope all the way along the width guides, keeping
the printing side face-down and the edge with the flap
facing the slot.
Important! How to load envelopes (orientation and facing) will differ depending on the type of envelope. Be
sure to load it correctly, otherwise printing may be done in the wrong direction or on the wrong face.
Up to five envelopes can be loaded.
Close the flap.
To Next Page
Loading...
