Basic Operation
3-16
Auto Sleep
This machine is equipped with the auto sleep function that automatically puts this machine into the
sleep mode if no operation has been performed on the machine for a preset period of time. The
factory default setting time is one minute.
Press the Energy Saver key again to resume copying operations. The recovery time 17.2 seconds.
Copiers and printers are generally in a standby mode more than they are in actual operation, so
power consumption in the standby mode occupies a large part of overall consumption.
Automatically putting the machine in a resting state reduces unnecessary power consumption in the
standby mode, resulting in a lower electricity bill.
To Next Page
Loading...
