Maintenance
6-2
Cleaning the Slit Glasses
If copies appear soiled, such as black lines appearing
on the copy image while using the optional document
processor, the slit glasses A and B are dirty. Wipe the
slit glasses with a dry soft cloth.
Important! Never use water, thinner, organic solvents or alcohol.
Note For cleaning the inside of the main body, see Replacing the Toner Container and the Waste
Toner Box on page 6-5.
Cleaning the Separation Needle
1
Open the front cover.
2
Remove the cleaning brush.
3
Pull the left cover handle up to open the cover.
A
B
To Next Page
Loading...
