Kyocera Taskalfa Pro 15000c - Page 118

3-40
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
3
Align holes in the handle, with holes in the handle fulcrum [A], and secure them
(Screws x2: M3x8 with washer).
4
Lift the right cover [A] slightly and take it off sliding to the left (Screw x2). The cover
[A] and screws will not be used again.
5
Close the right cover and remove metal parts [A] (Screw x4). The metal parts [A] and
screws will not be used again.
[A]
[A]
[A]
2
1
[A]
[A]