Kyocera Taskalfa Pro 15000c - Other Maintenance Mode; Setup in a High Altitude; Output Maintenance Report (Maintenance Mode U000); Clearing the Counts (Maintenance Mode U927)

2-62
The main unit setup procedure > Other maintenance mode
[CONFIDENTIAL]
2 - 6 Other maintenance mode
(1) Setup in a high altitude (Maintenance mode U732
When setting up in a high altitude, execute the following
1
Input "732" and press [Start] key.
2
Select the altitude from (0 - 1000m/1001 - 2000m/2001 - 3000m/3001 - 3500m)
(2) Output maintenance report (Maintenance mode U000)
In case there is the optional installation, perform maintenance mode after the installation.
1
Input "000" using the numeric keypad and press [Start] key.
2
Select [Maintenance] and press [Start] key to output the maintenance report.
3
Press [Stop] key.
(3) Clearing the counts (Maintenance mode U927)
In case there is the optional installation, perform maintenance mode after the installation.
1
Input "927" using the numeric keypad and press [Start] key.
2
Select [Execute].
3
Press [Start] key to clear all the counter value.
4
Press [Stop] key.
(4) Setting the delivery date (Maintenance mode U278)
1
Input "278" using the numeric keypad and press [Start] key.
2
Select [Today].
3
Press [Start] key to set the delivery date.
4
Press [Stop] key.
(5) Store the setting value (Maintenance mode U023)
1
Input "023" using the numeric keypad and press [Start] key.
2
Select [Installation] and select [Backup].
3
Press [Start] key to store the setting value.
4
Press [Stop] key.