2-61
The main unit setup procedure > Adjustment
[CONFIDENTIAL]
14
Select [Side Pos Adj] next.
15
Set A4/LTR in reduction on upper cassette 1.
16
Select [Print (Adjust)] and press [Start] key to output the adjustment chart.
17
Place back the printed chart in cassette and print on back side.
18
Press [Start] key to output the adjustment chart.
19
Find the leftmost point on the scale line that cross with the horizontal line and read
the value by the scale line as V value.
20
Find the closest position of the line on face and back on the chart as H value.
21
Press [Stop] key.
22
Select [Regist].
23
Change the setting value by using [+] [-] keys or the numeric keys.
24
Press [Start] key to set the setting value.
25
Select [Print (Check)] and press [Start] key to output the test chart.
Adjust V value below 0.5 and H value to 0.
To Next Page
Loading...
