3-68
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
70
Attach the horizontal transport front cover to the horizontal transport unit (Screw x5).
Screws are used in Step 68 and in Step 69.
71
Attach the detents [B] to the stay [A] removed in step 68 (Screw x4: M4x8).
72
Attach the right slide rail [A] provided with this option to the paper feeder (Screw x4:
M4x8).
• Do not remove fixing tapes when turning over the horizontal transport unit to attach the screws to the back
side.
To Next Page
Loading...
