Kyocera Taskalfa Pro 15000c - Page 188

3-110
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
2 Loosen screws (Screw x2). Remove stopper [A] by rotating it. Turning the bolt [C] clockwise with wrench [B]
makes DE unit higher and counterclockwise makes it lower.
3 Remove screws (Screw x2). The screw will use in step 14-6.
NOTE
• height can be adjusted by 2 steps higher and lower in 3.5 mm pitch.
[B]
[C]
[A]
[C]
M4x10 Black TP
M4x12