Kyocera Taskalfa Pro 15000c - Page 192

3-114
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
16
Put back the lock lever [A] to original position (Screw x1: M3x6TP).
17
Put back the rear lower cover to the original position (Screw x9). Screw was removed
in step 12.
18
Check gap of DE-9100 and main unit. Set the units as deference between [A] and [B]
has to be within 1 mm.
[A]
[A]
[A]
[B]