Kyocera Taskalfa Pro 15000c - Page 195

3-117
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
22
Attach connecting plate [A] to DE-9100 (Screw X2: M4x20).
23
Hook up connector [A] of cable to the connector on DE-9100. Hang the cable [B] on
hook [C].
24
Attach connector cover [B] to connecting plate [A]. Check if the cable is covered with
the connector cover [B].
[A]
[A]
[B]
[C]
[A]
[B]