Kyocera Taskalfa Pro 15000c - Page 202

3-124
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
37
Get 2 projections [B] into holes [C] of the foot cover rear [A]. Put back the foot cover
rear to the original position (Screw x3). Screw was removed in step 32.
38
Get 2 projections [B] into holes [C] of the foot cover front [A]. Put back the foot cover
front [A] to original position (Screw x2). Screw was removed in step31 .
[A]
[B]
[C]
[A]
[A]
[C]
[B]