6-56
Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
[CONFIDENTIAL]
Head Position Adjustment
U468 Check head print position adjustment
1
Set the maximum sized paper such as over A3/Ledger paper.
2
Select [Print] in U468 Cor Reg Dat.
3
Select [Head Pos] and press [Start] key.
Color position adjust chart is output.
4
Check if there is the print image on the chart below.
In case if Yellow color is not visible on the chart, copy the chart by the following procedure.
[Color/Image quality] > [Hue Adjust] > select [Individual] > select [Yellow] of Hue circle and shift to “Red” side 3
times and then press [OK] to make copy.
[Yellow] section becomes [Green] so that distinguish with that condition.
Or, using the UV light (Black light) sold commercially available in the market which makes easier to view Yellow.
To Next Page
Loading...
