EasyManua.ls Logo

KZ CONNECT - Breakaway Switch

Default Icon
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
THE BRAKE SHOES PRECISELY. WITH SELF-ADUSTING
BRAKE SYSTEM, THEY WILL SEAT THEMSELVES MUCH
SOONER THAN NON-SELF ADUSTING SYSTEM.
This is why KZRV has chosen to place self-adjusting brakes on your
coach.
Breakaway Switch
The breakaway switch is a safety part of your trailers electric brake
system. The very instant a breakaway occurs, the pull pin which is
linked to the tow vehicle is pulled from the switch. The two contacts
automatically close to complete the electrical circuit and apply the
trailer brakes. This system will apply the brakes of the trailer should
it become loose or detached from the tow vehicle. A 12-volt battery
installed on the coach is required to power the breakaway switch.
Never use this breakaway switch and trailer brake system as a
parking brake. There would be a high amp draw on battery and
converter, potentially causing damaged wiring, connectors, and
breakaway switch plus unnecessary energy draw.
CAUTION; REMOVING PLUNGER WITH POWER TO BRAKES
COULD RESULT IN DAMAGE TO BRAKES.
WARNING: Removing plunger while in storage could result in
corrosion to unit points.
WARNING; A tag may be attached to lanyard cable; DO NOT
use as a parking brake.
SAFETY BREAK-AWAY SWITCH
WILL NOT OPERATE
Unless connected to a power source
equivalent to or greater than an auto
-motive type 12 volt, 12 amp hour
wet-cell battery.
PDF created with pdfFactory trial version www.pdffactory.com

Table of Contents

Related product manuals