67
ELECTRIC SYSTEM________________________________
General Information
The electrical system in your
recreational vehicle is designed for
using both 120 volt AC (alternating
current) and 12 volt DC (direct current)
capabilities. All installations and
designs are built to comply with safety
requirements of ANSI standard 1192,
National Electric Code and Canadian
Standards Association.
All coaches manufactured by KZRV
have 30 amp or optional 50 amp
service.
Highly recommend that your RV
electrical connection, is not plugged
into a household outlet.
Changes and Modifications
Any changes, alternations, additions, and/or modifications need to
be performed by qualified electrical technicians, using only approved
components which meet safety and code requirements. This
includes owners, dealers, etc. who desire to make changes. The
manufacturer is not responsible for any changes, or alterations,
made to the 120 volt AC system of the coach.
120 Volt A/C System
Power Cord 30 AMP or 50 AMP
Power cord is a detachable cord, stored inside of coach for travel.
Remove cord and attach to incoming power source and to your
coach to receive current. This cord places 120 AC volt power into
your breaker distribution center, as built into your coach.
30-A, 125-V, 2-pole, 3-wire,
grounding type
50-A, 125/250-V, 3-pole, 4-wire,
grounding type
A 50 amp service is a 240-volt hook-up. There is no appliance or other
component requiring 240 volts in this coach. For more information , see the
section later in this chapter, 50 Amp (Optional).
CAUTION
!
PDF created with pdfFactory trial version www.pdffactory.com
To Next Page
Loading...