L-Acoustics A15i Series User Manual

Rigging procedures
Assembly
Procedure
1. Prepare the rst enclosure by removing the placeholder screws and securing rigging plates on both sides.
A15i Wide/Focus KS21i
2. Secure A15i-RIGBAR at the rear of the enclosure.
Secure A15i-RIGBAR at the front for a positive initial site angle.
A15i Wide/Focus KS21i
3. Select the pick-up point and raise the array.
4. Follow the relevant procedure in Flying a vertical array with A15i-BUMP (p.53) from step 4 to the end.
What to do next
Adding a pullback with A15i-RIGBAR (p.67)
66 A15i owner's manual (EN) version 1.0

L-Acoustics A15i Series Specifications

General

Brand	L-Acoustics
Model	A15i Series
Category	Speakers
Language	English