Rigging procedures
7. Secure the enclosure to the U-bracket rigging plates.
Apply a torque of 7 N.m.
Top
Bottom
A15i Focus A15i Wide KS21i
A15i Focus
A15i-ULINK A15i-ULINK A15iKS21i-ULINK
A15i Wide
A15i-ULINK A15i-ULINK A15iKS21i-ULINK
KS21i Not allowed Not allowed
KS21i-ULINK
If the two enclosures are misaligned at the front, loosen the screws on the U-rigging plates and realign the two
enclosures, then re-tighten the screws.
What to do next
Securing a screen (p.94)
A15i owner's manual (EN) version 1.0 79