Rigging procedures
Remove the ball-locking pin of the sliding arms and lift the enclosure to set the angle.
Set the angle and secure the sliding arm with the ball-locking pin.
Multiple angles are available:
20°
12.5°
17.5°
15°
7.5°
10°
0°
2.5°
5°
Number of stacked K3 on KS28
Refer to Soundvision for the maximum number of enclosures.
7. Add another K3 to the rst one.
Refer to Preparing a block of four K3 (p.61).
88 K3 owner's manual (EN) version 1.0
To Next Page