La Crosse Technology V50 User Manual

02
Initial Setup
Power Up
Note: It may take up to 10 minutes for your sensor data to appear on your
station’s screen.
BASICS
1. Install 3 “AA” batteries into the Battery Compartment of your Breeze Pro Sensor.
2. Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack
on the back of the station. Next, remove the Insulation Tab from the station’s
Battery Compartment.
Bottom of Breeze Pro Sensor Back of Station Power Jack

La Crosse Technology V50 Specifications

General

Brand	La Crosse Technology
Model	V50
Category	Weather Station
Language	English