Station Settings
BASICS
* The default pressure reading is 29.92 INHg (1013 hPa). The station will acclimate on it’s own if the pressure
number is not set. Learn more on page 17
Use the +/- buttons on the
top of the station to adjust
the values.
Press the SET button to
confirm selection and move
to next step.
You may exit the Settings
Menu at any time by pressing
the LIGHT button.
Settings Menu Order
Greeting • Language • Beep On/O • 12/24 Hour Time • Hour • Minute • Year
Month • Date • Calendar Order (Month/Date or Date/Month) • Fahrenheit/Celsius
Pressure Units (InHg/hPa) • Pressure Number Setting* • Wind Speed Units (MPH
or KMH) • Wind Direction (Letters or Degrees) • Thank You
1.
2.
When the station is first powered on, it will begin searching for your outdoor
sensor, which should connect shortly.
To manually set your time, date, and other settings, hold the SET button to
enter the Settings Menu.
Notes: Weekday will set automatically after year, month, & date settings are adjusted.
If you’re connected to the Wi-Fi, the time and date will automatically update from the
Internet. See pages 3-4 for more information.
06
To Next Page
Loading...
