La Marzocco LEVA X - Cup Warmer (Technical Programming); Settings

EN
72
Display Operating Procedure
Description
“Technical” Programming
Menu 93.2°C
Enter Password
0000
1
After entering the password and accessing the "Technician" programming menu, rotate the Encoder Knob until
the following is displayed.
Menu 93.2°C
Cup Warmer
Settings
2
Press the Encoder Knob to access the menu.
Menu 93.2°C
Cup Warmer
ENABLED
3
Press the Encoder Knob to access the menu, rotate the Encoder Knob to choose between ENABLED and DISABLED,
press the Encoder Knob to conrm the option.
Menu 93.2°C
Cup Warmer
On Time: 2 min
Off Time: 8 min
4
Press the Encoder Knob to access the menu, rotate the Encoder Knob to set the desired time, press the
Encoder Knob to conrm the option.
Menu 93.2°C
Auto On/Off
ENABLED
• This parameter allows the technician
to enable or disable the cups heating
function.
• This parameter allows the technician
to adjust the operating time of the
resistance for the heating of the cups.
• This function is displayed only on the
models of espresso machine equipped
with this accessory.
• In TIME mode it is possible also to
stop and to restart the cycle of the cup
warmer by pushing the cup warmer
button.
Cup Warmer
Menu 93.2°C
Steam Boiler
Settings
Menu 93.2°C
Cup Warmer
Settings