La Marzocco LEVA X - Reset Pressure Guides (Technical Programming)

EN
92
Display Operating Procedure
Description
“Technical” Programming
Menu 93.2°C
Enter Password
0000
1
After entering the password and accessing the "Technician" programming menu, rotate the Encoder Knob until
the following is displayed.
Menu 93.2°C
Reset
Pressure Guides
2
Press the Encoder Knob to reset the settings.
Menu 93.2°C
Resetting
Pressure Guides
3
Reset in progress.
Menu 93.2°C
Exit
Menu
4
You must scroll to the exit menu to exit the programming mode, or press the Encoder Knob for 2 seconds.
Menu 93.2°C
Reset
Settings
• This parameter allows the operator to
reset the pressure guide proles to the
original factory settings.
Reset Pressure Guides
Menu 93.2°C
Bluetooth
ENABLED
Menu 93.2°C
Reset
Pressure Guides